
            Semi-Professional Quality Colour Test Card Generator.
            -----------------------------------------------------

  Preface:-
  ---------

A basic engineering tool for MikeOS 4.0x and higher issued as PD, (Public
Domain), to MikeOS. Original copyright goes to (C)2010, B.Walker, G0LCU.

  Overview:-
  ----------

This is a basic Test Card Generator to assist in old analogue monitor
geometry, convergence and colour adjustments. It is all done at the
equivalent of CGA level so that ALL CRT style colour monitors can be tested
and serviced to at least a known standard.

It is just the Test Card itself and does NOT include separte Red, Green and
Blue screens, Crosshatch and Centre Cross, Colour Bar and Greyscale plus
many others. If you like what you see and would like me to develop a serious
test tool for MikeOS then Email me using the address below...

Enjoy finding simple solutiuons to often very difficult problems... :)

Bazza, G0LCU... :)

=============================================================================

                                IMPORTANT:-
                                -----------

    The Legal Stuff:-
    -----------------

    These programs are Freeware and no profit will be made from them,
    also all of the files must remain unaltered and intact including this
    one. The author is not responsible for any damage to, or loss of, or
    failure of equipment or data caused in any way by the use of these
    programs. There is NO warranty with the use of these software releases
    and YOU USE THEM AT YOUR OWN RISK.

----------------------------------------------------------------------------

                                 WARNING.
                                 --------

  1) DISCONNECT any faulty equipment under test from the MAINS supply.
  2) If a DC supply is used do NOT reverse polarity the connections.
  3) Do NOT power up any electronic item until it is safe to do so.
  4) CHECK and RECHECK all of your construction and repair work thoroughly.
  5) Handle ALL tools used with care.
  6) Beware of ALL types of solvents, glues and etching fluids.
  7) NEVER leave a soldering iron switched on unattended.
  8) KEEP everything OUT of the reach of small children.
  9) Switch OFF the computer before disconnecting or connecting any hardware.
 10) And finally read 1) to 9) again.

----------------------------------------------------------------------------

   Contact:-
   ---------

   Mr Barry Walker, G0LCU,
   70 King George Road,
   Loughborough,
   Leicestershire,
   LE11 2PA,
   England.

   Email:-     wisecracker@tesco.net
   URL:-       http://homepages.tesco.net/wisecracker/G0LCU.HTM

   (Author of the ~TestGear?~ projects in the ~docs/hard~ drawer of AMINET.)

               http://aminet.net/search?readme=wisecracker

=============================================================================
